EDOLUC Glow arrow EDC Flashlight Brass Smooth Nichia 519a 4000K R9080/Samsung5000K/XPL6500K with Type-C 14500/AA Battery

EDOLUC Glow arrow Smooth 14500/AA Flashlight 

XPL 6500K （High）: 850 lumens

5000K （High): 680 lumens

Nichia 519A 4000K (High): 550 lumens.

Packaging :1pc with 1 Type-C 14500 battery/Box.

Size: 98mm(L) * 21mm(W)  

Weight: 123g(with battery)

Features

Programming Activation: After powering on with a long press, the rear switch needs to be lightly pressed 8 times or more, then pause until it begins to flash. (Once in programming mode, different modes can be selected based on the number of slow flashes. If no option is selected, the programming will cycle again once. If no option is selected after 2 cycles, the programming will exit.)

The programming functions are as follows:

 1. Selecting different mode combinations 1-6 groups:

   (1. Upon entering programming, it flashes once, then quickly tap the switch to enter mode selection.

   The first slow flash represents mode 1, the second represents mode 2, the third represents mode 3, the fourth represents mode 4, the fifth represents mode 5, and the sixth represents mode 6.)

2. Enabling or disabling memory function: (Factory settings without memory)

   (Upon entering programming, it flashes twice, then quickly tap or long press the switch during the quick flashes to enable/disable the memory function.)

 3. Turning on or off moonlight mode:

   (Upon entering programming, it flashes three times, then quickly tap or long press the switch during the quick flashes to turn off/on moonlight mode.)

 4. Changing the sequence of low-medium-high modes to high-medium-low:

   (Upon entering programming, it flashes four times, then quickly tap or long press the switch during the quick flashes to change the mode sequence.)

 5. Restoring factory settings (Factory settings without memory, with moonlight mode, low-medium-high mode sequence):

  (Upon entering programming, it flashes five times, then quickly tap or long press the switch during the quick flashes to restore factory settings.)

Quick Access Functions:

- Double-click quickly to enter 100%

- Triple-click quickly to enter strobe mode

Mode combinations, groups 1-6:

1. Moonlight-100%

2. Moonlight-30%-100%

3. Moonlight-5%-30%-100%

4. Moonlight-30%-100%-Strobe

5. Moonlight-10%-50%-Strobe-SOS

6. 100%-Strobe-SOS-Signal Flash-Police Flash

*Use of light in “strobe” mode may cause seizure in persons with photosensitive epilepsy.*